Avery Dennison Label Printer - Page 96

Avery
®
Personal Label Printer
82
Select the new template and click OK. The Design screen appears with the new template and
your previous design.
If the dimensions of the new template are different than the existing template, a Help
message displays: “Either the dimensions or the layout of the old and new templates are
different. Do you want more information?”
Click Yes . The Info on: Changing Templates dialog box appears. Your previous template
is displayed on the left and the new template is displayed on the right. This dialog box
allows you to compare the products and confirm your decision to change templates.
• To accept the new template, click OK. The Design screen appears with the new template
and your previous design. You may need to move and resize the design objects.
• To keep the previous template, click Select Template on the left side of the dialog box.
Click OK. The Design screen appears with the previous template layout.
If you select a new template and then decide to revert to the previous template, you will need
to use the Change Template command to reselect the previous template.