Installation and Setup 8
10 If the lit EuControl icon does not appear, do any of the following:
•See
3 – Add to add the Dock manually.
• Click the unlit EuControl icon and choose
Restart EUCON Applications.
• Shut down the Dock and your computer, then turn them on (Dock first, then the workstation computer).
•See
www.avid.com/Dock-Support for the most current troubleshooting information.
11 Proceed to Updating Dock Firmware.
To uninstall items:
1 Launch the installer
Items that are currently installed are selected (checked) and indicated as Installed.
2 Do the following:
• To uninstall specific component, make sure it is not selected (no check mark).
• To uninstall all EUCON applications, select
Uninstall all applications.
• To uninstall all User Preferences, select
Uninstall User Preferences (your appsets will not be removed).
3 Click Continue (Mac) or Next (Windows).
AutoLaunch Settings
You can enable or disable auto-launch for EuControl, WSControl, and/or XMON using the new AutoLaunch selector.
To configure AutoLaunch on Mac:
1 Make sure EuControl or S6 WSControl is installed, then do the following:
Mac
Click on the EuControl or WSControl icon in the menu bar.
Windows
Right-click on the EuControl or WSControl icon in the System Tray at the bottom of the screen.
2 From the Auto-launch Apps sub-menu, choose any of the following (you can enable more than one):
•
EuControl (for the Dock, S1, S3, Avid Control, and Artist Series)
•
WSControl (for S4/S6)
• MTRX (DADMan, for Pro Tools | MTRX and MTRX Studio)
•XMON
EuControl Auto-launch Apps selector (macOS shown)
To Next Page
Loading...
Need help?
General
