Dock Surface Controls Overview 21
Right Control and Vertical Touchstrip
These twelve switches include controls for navigation (such as Bank and Nudge), Wheel modes (such as Jog, Shuttle, Zoom,
and
Scroll), and utility controls (such as OK, Cancel and the App/Workstation switch).
The EUCON
Show Me icon is shown between the Save and
Cancel switches. Pressing
Save + Cancel simultaneously
shows Soft Key assignments in EuControl.
VerticalTouchstrip
To the right of the switches is a vertical, continuous Touchstrip
with four zones labeled
1, 2, 3, and 4 from top to bottom. By
default, these zones are assigned to the following functions:
For information on how you can customize the touchstrip, see the Using EuControl Surfaces.pdf.
Wheel and Horizontal Touchstrip
The Wheel can be used to jog, shuttle, scroll, and zoom, mark in and out
points, move selections, and adjust clip gain, as determined by the Wheel
mode switches in the
Right Control and Vertical Touchstrip section.
Below the Wheel is a horizontal continuous Touchstrip with four zones la-
beled
1, 2, 3, and 4 from left to right. By default, these zones are assigned to
the following functions:
For information on how you can customize the touchstrip, see Using EuControl Surfaces.pdf.
Touchstrip (vertical) primary and SHIFT functions
Zone Primary Layer SHIFT Layer
1 System Usage Preferences
2 Toggle Child Folders Task Manager
3 Toggle Sibling Folders Workspace
4 Toggle Folders Video window
Touchstrip (horizontal) primary and SHIFT functions
Zone Primary Layer SHIFT Layer
1 Toggle Folders Mix/Edit Window toggle
2 Toggle Sibling Folders Hide All Floating Windows
3 Toggle Child Folders Memory Locations Window
4 System Usage System Usage Window
1
2
3
4
Mark Out
Scroll V
User 1
User 2
Nudge
Nudge
Scroll H
Mark In
Do to All
Workstation
Shuttle
Jog
ZoomZoom
Bank
Bank
H
V
Cancel
Save
OKApp
Move
Sel
Do to
Sel
To Next Page
Loading...
