Installation and Setup 15
Connecting a Second Workstation
The Dock can control applications running on a second computer connected to the same network as the primary computer, referred
to in this guide as a workstation. If EuControl is running on the same workstation as all your audio/video applications you can skip
these instructions.
To be able to control a second workstation:
1 Quit (Mac) or Exit (Windows) Pro Tools and any other EUCON applications running on any of your workstations.
2 Transfer the EUCON_WorkstationUnifiedInstall file onto the second computer. After downloading, make sure the installer is
mounted (DMG on Mac) or uncompressed (ZIP for Windows).
3 Double-click the Install EUCON Workstation Unified installer, then select the EUCON Workstation option and click Next.
4 When installation has finished, go to Spotlight (Mac) or Search (Windows), and type “MC Client” to locate the application, then
launch MC Client.
5 On the primary workstation, do each of the following:
• Open EuControl Settings, go to the
Workstations tab, and click to enable Enable External Workstations. Follow the prompt
and wait until EUCON applications restart. You must also manually relaunch your DAW.
• Go to System Preferences > EUCON (Mac) or Control Panel > EUCON (Windows), click the Network Interface selector and
choose the port used for your EUCON network connection (such as
Ethernet 1).
6 On the secondary workstation, do each of the following:
• Go to System Preferences > EUCON (Mac) or Control Panel > EUCON
(Windows).
• Make sure the Network Interface selector shows the correct network port for
your EUCON connection.
• If it is not already enabled, click to enable
Enable as External Workstation.
Follow the prompt and wait until EUCON applications restart. You must also
manually relaunch your DAW.
7 On the primary workstation, open the EuControl Settings window by doing ei-
ther of the following:
• On Mac, click the EuControl icon on the taskbar and select
EuControl Settings.
• On Windows, double-click the EuControl icon in the system tray and select
EuControl Settings. If you don't see the EuCo-
ntrol icon, it could be automatically hidden by Windows. Click on the small white arrow to show hidden icons, then dou-
ble-click the EuControl icon.
8 In EuControl Settings, go to the Workstations tab.
9 Select your secondary workstation in the All Workstations list, then click Add to add it to the My Workstations list.
EUCON Workstation selected in EUCON Combined Installer
To Next Page
Loading...
Need help?
General
