Appendix A: Specifications 33
Network Interface
Electrical Specifications
Power supply cord must be a light sheathed flexible cord according to IEC60227 (designation 60227 IEC
52) and include a protective earth conductor having a green-and-yellow insulation. Cross-sectional
areas min. 3 x 0.75mm.
Mechanical Specifications
Interface 1000BASE-T, RJ45 connector, 4-pair connection
Power consumption 45 VA max.
Input voltage 90–260 VAC
100–240 VAC Nominal, 47–63 Hz
Mains fuse, mounted in IEC connector 1 A, T1AH/250V
Safety compliance N 60950-1:2006
Mains line plug type Correct type acc. to standard
110–125V UL817 and CSA C22.2 no 42
220–230V CEE 7 page VII, SR section 107-2-D1/IEC 83 page C4
240V BS 1363 of 1984.Specification for 13A fused plugs and
switched and un-switched socket outlets
Chassis standard 19”, 1 RU
Chassis depth, without connectors mounted 23.5 cm / 9.3”
Chassis body width 43.5 cm / 17.2”
Weight, not including I/O cards 2.8 kg / 6.5 lbs.
To Next Page
Loading...
Need help?
General
