A good control of the resolution results a
good detail of an image that scans. The
resolution is measured by dots per inch
(dpi). Normally, the greater the dpi
number, the higher the resolution and
the image file size. Be aware that
greater resolution takes more time to
scan, and more disk space for the
scanning image. For your information,
an A4 size color image scanned at 300
dpi at True Color mode consumes
approximately 25 MB of disk space. A
higher resolution (usually means over
600 dpi) is only recommended when you
need to scan a small area at True Color
mode.
Choose a resolution value from the drop
down list. The default value is 200 dpi.
Available resolutions are 75, 100, 150,
200,300, 400 and 600. Or you may
choose your desired value by clicking the
box in the right side of the drop down list
and press the arrow key to select your
desired value and then click the Add
button to include it in the drop down list.
Note: The resolution is up to 300 dpi if
an imprinter or a MICR reader is installed
or connected to the scanner.
To Next Page
Loading...
