Avision FL-1801 - Page 191

183
BM2 and VSL Errors
200100
To use the [BM2]
function, you need to first
install Button Manager V2
onto your computer.
Check if the PC has installed Button Manager.
200101
VSL disconnect.
Check if the VSL connection on the PC still work.
Scanner Errors
000016
UART read and write
test error
Restart the device. If the error persists, call
service to replace the main board.
000017
Motor Stall
Restart the device. If the error persists, call
service to replace the motor.
000020
Download firmware
error
Check firmware file and try again.
000022
Lamp off error.
Restart the device. If the error persists, call
service to replace the lamp.
000023
Flashrom read and write
test error.
Restart the device. If the error persists, call
service to replace the main board.
000029
ADF AFE read and write
test error.
Restart the device. If the error persists, call
service to replace the main board.
002013
Paperjam
Open the front door to remove the jammed
paper.
002014
ADF cover opens
Close ADF cover.
002015
ADF no paper.
Load paper into the auto document feeder.
002024
NVRAM read and write
test error.
Restart the device. If the error persists, call
service to replace the main board.
003101
Multiple feed
Remove paper.
Fan your paper and tray again.
002033
Page skew.
Remove paper.
Fan your paper and try again.
002036
Ultrasonic sensor error
Restart the device. If the error persists,
contact service personnel.
002037
ADF Bottom head AFE
test error.
Restart the device. If the error persists, call
service to replace the main board.
002040
Fan check error
Restart the device. If the error persists,
contact service personnel.
003003
DRAM read and write
test error.
Restart the device. If the error persists, call
service to replace the main board.