2. Move the tab of the ADF roller UP.
3. Pull the belt DOWN.
4. Close the ADF roller cover. A snap-in sound could be heard if correctly installed.
*Note:
Consumables must be replaced regularly. It is recommended to purchase new
consumables in advance so that they can be replaced before the end of
their life time.
The replacement cycle is based on the use of A4 (80 g/m2 [20 lb]) wood-free
paper or plain paper. The actual cycle varies according to the type of used
paper and how frequently the scanner is used and cleaned.
Use only the specified consumables.
To purchase consumables, contact the store where you purchased the scanner
or an authorized scanner service provider.
To Next Page
Loading...
