Avision FL-1801 - Page 41

33
8. On the Preview screen,
 Start: If the scanned image is OK, press the [Start] button ( ) on
the touch panel to distribute the scanned image.
 Remove: If the scanned image is not satisfactory, tap the [Remove]
button ( ) to delete the scanned image.
 Insert: You may also insert more pages by taping the [Insert]
( ) button.
 Cancel: If the scanned image is not OK, tap the [Cancel] button
( ) to abort the job.
9. In a second, the scanned image will be sent to your E-mail addresses.