Enter the “From” address of your outgoing mails from the
product. If an E-mail can not be sent, notification is returned
to this address. If the administrator has not set the device’s
email account in the Mail Server settings, you can enter the
email address here. This is the “From” address in your
E-mail when you receive an email from the product.
Enter a “Reply to” address if you wish to specify a reply
address which is different from the “From” address. Up to 60
characters can be entered in the field. To enter the address,
you may press anywhere on the “Reply To” field to bring up
the soft keyboard to type the address.
Type your email message here. To enter the text, you may
press anywhere on the “Message” field to bring up the soft
keyboard to type the text.
Enter the file name for your scanned document without
extension. If you have not entered a value in the box, the
system will bring you a default file name, image. Using #n
#Y#M#D#h#m#s makes file name change as time goes. (n,
Y, M, D, h, m, and s represent series number, year, month,
date, hour, minute, and second respectively.) For example,
type file name: test#n#D will bring your filing file name as
test000105
Limit the file size of the attachment of each outgoing email to
avoid the size limitation from SMTP servers. Use the combo
box to select from the list.
Choice: 5MB/10M/20M/30MB/*Unlimited
To Next Page
Loading...
