AVM Fritz!Box 7490 User Manual

FRITZ!Box 7490 102
LISP: FRITZ!Box as a LISP Router
Configuring FRITZ!Box as a LISP Router
FRITZ!Box as a LISP Router
• The FRITZ!Box can be configured as a LISP router.
• As a LISP router is the FRITZ!Box is an xTR (ETR and ITR).
Preparations
You need a LISP provider.
 Register with a LISP provider.
All of the information you need to configure the FRITZ!Box as a
LISP router is supplied by the LISP provider.
Configuring a LISP Router
1. Open the FRITZ!Box user interface, see page 32.
2. Enable the advanced view.
3. Select the “LISP” tab.
4. Enable the setting “LISP support enabled”.
5. Enter in the fields the information you received from the
LISP provider.

AVM Fritz!Box 7490 Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Wi-Fi standards	802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)	1300 Mbit/s
USB version	3.2 Gen 1 (3.1 Gen 1)
Rack mounting	No
Frequency range	2.4 - 5 GHz
Bandwidth (first)	2.4 GHz
Bandwidth (second)	5 GHz
USB ports quantity	2
WLAN data transfer rates supported	450, 1300 Mbit/s
Ethernet LAN (RJ-45) ports	4
DHCP client	-
Security algorithms	WPA2, WPS
Power consumption (typical)	9.3 W
Product color	Red, Silver
Cables included	DC, LAN (RJ-45), Phone (RJ-11)

Weight and Dimensions

Depth	175 mm
Width	245 mm
Height	55 mm
Weight	- g