AVM Fritz!Box 7490 User Manual

FRITZ!Box 7490 98
Mobile Network: Replacing Faulty DSL
14.10 Mobile Network: Replacing Faulty DSL
Internet access over the mobile telephone network can be set
up so that the mobile telephone connection is established
automatically whenever the DSL connection fails. This guar-
antees Internet access even when the DSL connection is fails.
A USB modem for mobile Internet access (UMTS/HSPA) and a
SIM card from a mobile communications provider are re-
quired for this. The FRITZ!Box supports UMTS/HSPA modems
from various manufacturers.
Here is how to set up the mobile telephone connection as a
substitute upon DSL failure:
1. Insert the USB modem in the USB port on the FRITZ!Box.
2. Open the FRITZ!Box user interface, see page 32.
In the “Internet” menu, the sub-menu “Mobile Commu-
nications” is displayed.
3. Select the setting “Automatically enable the mobile con-
nection when the DSL connection is disrupted”.
4. Configure the settings for your Internet connection over
the mobile communications network. In the Help of the
FRITZ!Box user interface you can find detailed in-
structions.
Access to the Internet is now guaranteed, even when the DSL
connection fails.
As soon as the DSL connection is stable and available for at
least 30 minutes, the connection will be switched back to
DSL.
The “Mobile Communications” menu is not available
until the UMTS/HSPA modem has been connected to the
USB port of the FRITZ!Box.

AVM Fritz!Box 7490 Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Wi-Fi standards	802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)	1300 Mbit/s
USB version	3.2 Gen 1 (3.1 Gen 1)
Rack mounting	No
Frequency range	2.4 - 5 GHz
Bandwidth (first)	2.4 GHz
Bandwidth (second)	5 GHz
USB ports quantity	2
WLAN data transfer rates supported	450, 1300 Mbit/s
Ethernet LAN (RJ-45) ports	4
DHCP client	-
Security algorithms	WPA2, WPS
Power consumption (typical)	9.3 W
Product color	Red, Silver
Cables included	DC, LAN (RJ-45), Phone (RJ-11)

Weight and Dimensions

Depth	175 mm
Width	245 mm
Height	55 mm
Weight	- g