EasyManuals Logo

AVM Fritz!Box 7490 User Manual

AVM Fritz!Box 7490
196 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #99 background imageLoading...
Page #99 background image
LISP: FRITZ!Box as a LISP Router
FRITZ!Box 7490 99
14.11 LISP: FRITZ!Box as a LISP Router
LISP is a routing architecture which separates information
about location and identity. There are two IP addresses: one
for the location and one for the identity.
The FRITZ!Box can be configured as a LISP router.
This chapter address system administrators.
It presents a short introduction to LISP.
You receive an overview about the possibilities for using
LISP.
This chapter includes instructions on how to configure
the FRITZ!Box as a LISP router.
Definition and Components
LISP: Definition
LISP: Locator/Identifier Separation Protocol
IP protocol LISP is a protocol for the transmission of IP
packets.
IP address pair LISP uses IP address pairs:
One IP address for identification, which is
called the EID (Endpoint Identifier). The
EID can be the IP address of a host or an
entire IP subnet.
One IP address for the location, known as
the RLOC (Routing Locator). The RLOC is
the IP address of the LISP router.
Tunnel protocol LISP is a tunnel protocol.
A LISP packet consists of an internal IP packet
and an additional external header. The header
of the internal packet contains the EID; the ex-
ternal header contains the RLOC.

Table of Contents

Other manuals for AVM Fritz!Box 7490

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AVM Fritz!Box 7490 and is the answer not in the manual?

AVM Fritz!Box 7490 Specifications

General IconGeneral
Ethernet LANYes
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Wi-Fi bandDual-band (2.4 GHz / 5 GHz)
Wi-Fi standards802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standardWi-Fi 5 (802.11ac)
WLAN data transfer rate (max)1300 Mbit/s
USB version3.2 Gen 1 (3.1 Gen 1)
Rack mountingNo
Frequency range2.4 - 5 GHz
Bandwidth (first)2.4 GHz
Bandwidth (second)5 GHz
USB ports quantity2
WLAN data transfer rates supported450, 1300 Mbit/s
Ethernet LAN (RJ-45) ports4
DHCP client-
Security algorithmsWPA2, WPS
Power consumption (typical)9.3 W
Product colorRed, Silver
Cables includedDC, LAN (RJ-45), Phone (RJ-11)
Weight and Dimensions IconWeight and Dimensions
Depth175 mm
Width245 mm
Height55 mm
Weight- g

Related product manuals