AVM Fritz!Box 7490 User Manual

Mode “No login”
FRITZ!Box 7490 69
1. Disconnect the FRITZ!Box from the power supply.
2. Reconnect to the power supply after about five seconds
and wait until the “Power / DSL” LED lights up.
In the first ten minutes after restarting you can restore
the factory settings to the FRITZ!Box.
3. Open the browser on a computer connected with the
FRITZ!Box by LAN or wireless LAN and enter fritz.box
in
the address field.
4. In the “Welcome to your FRITZ!Box” window, click “For-
got your password?” underneath the password query
and follow the instructions on the screen.
The FRITZ!Box is reset to the factory settings and then re-
started. Afterwards you can once again access the
FRITZ!Box user interface.
5. After restarting, reconfigure the FRITZ!Box over the user
interface or load your saved settings to the FRITZ!Box;
see page 40.
This concludes the reset of the FRITZ!Box.
12.5 Mode “No login”
From within the home network you can operate the FRITZ!Box
user interface without enabling password protection. This
means that every user who accesses the interface of your
FRITZ!Box can view and change all information and settings.
In the “No login” mode, your private information is not suffi-
ciently protected from malicious programs or unwelcome ac-
tivities. Therefore we urgently advise against using the
FRITZ!Box without password protection!
For comprehensive information about logging in to the
FRITZ!Box with a password, see the sections Using FRITZ!Box
Users from page 61 and Using a FRITZ!Box Password from
page 59.
Protect your FRITZ!Box by defining a password for the
FRITZ!Box user interface. To do this, go to the “System /
FRITZ!Box Users / Login to Home Network” menu and select
one of the password protection methods.

AVM Fritz!Box 7490 Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Wi-Fi standards	802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)	1300 Mbit/s
USB version	3.2 Gen 1 (3.1 Gen 1)
Rack mounting	No
Frequency range	2.4 - 5 GHz
Bandwidth (first)	2.4 GHz
Bandwidth (second)	5 GHz
USB ports quantity	2
WLAN data transfer rates supported	450, 1300 Mbit/s
Ethernet LAN (RJ-45) ports	4
DHCP client	-
Security algorithms	WPA2, WPS
Power consumption (typical)	9.3 W
Product color	Red, Silver
Cables included	DC, LAN (RJ-45), Phone (RJ-11)

Weight and Dimensions

Depth	175 mm
Width	245 mm
Height	55 mm
Weight	- g