Do Not Disturb
FRITZ!Box 7490 125
16.8 Do Not Disturb
Do Not Disturb for All Telephones
In the FRITZ!Box night service you can set up a Do Not Disturb
function so that none of the connected telephones and other
terminal devices signal calls.
Do Not Disturb is switched on and off daily at previously spec-
ified times.
When Do Not Disturb is switched on, connected telephones
and terminal devices will work in the following way:
• Telephones will not ring.
This is not the case for IP telephones. It is not possible to
set up Do Not Disturb for IP telephones in the FRITZ!Box.
• Fax and answering machines are disabled.
The Do Not Disturb setting has no effect on fax reception
or the answering machines integrated in the FRITZ!Box.
Do Not Disturb for a Single Telephone
The Do Not Disturb function for an individual telephone is
configured in the telephone settings.
1. Open the FRITZ!Box user interface, see page 32.
2. Select “Telephony / Telephony Devices”.
3. Click the “Edit” button to open the settings of a tele-
phone:
4. Switch to the “Do Not Disturb” tab and configure the Do
Not Disturb settings.
5. Click “OK” to save the settings.
Do Not Disturb is now enabled.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
