AVM Fritz!Box 7490 User Manual

FRITZ!Box 7490 126
Alarm
16.9 Alarm
When you configure an alarm, your telephone rings at the
specified time.
Configuring the Alarm
1. Open the FRITZ!Box user interface, see page 32.
2. Select “Telephony / Alarm”.
3. Enable the alarm and enter a time.
4. Select which telephone should ring at the specified
time.
5. Define here whether the alarm should be repeated.
6. Click “Apply” to save the settings.
The alarm is configured and enabled.
16.10 Baby Monitor
The following telephones can be configured as a baby moni-
tor:
• FRITZ!Fon cordless telephones
• Telephones connected to the “FON 1” or “FON 2” on the
FRITZ!Box.
When a telephone is configured as a baby monitor, it calls a
previously specified telephone number automatically when-
ever the volume in the room reaches a defined level.
Configuring a FRITZ!Fon Cordless Telephone as a Baby
Monitor
1. Press the menu key on your FRITZ!Fon.
2. Select “Suppl. services” and then press “OK”.
3. Select “Baby monitor” and then press “OK”.
4. Select “Destination no.” and then press “OK”.

AVM Fritz!Box 7490 Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Wi-Fi standards	802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)	1300 Mbit/s
USB version	3.2 Gen 1 (3.1 Gen 1)
Rack mounting	No
Frequency range	2.4 - 5 GHz
Bandwidth (first)	2.4 GHz
Bandwidth (second)	5 GHz
USB ports quantity	2
WLAN data transfer rates supported	450, 1300 Mbit/s
Ethernet LAN (RJ-45) ports	4
DHCP client	-
Security algorithms	WPA2, WPS
Power consumption (typical)	9.3 W
Product color	Red, Silver
Cables included	DC, LAN (RJ-45), Phone (RJ-11)

Weight and Dimensions

Depth	175 mm
Width	245 mm
Height	55 mm
Weight	- g