Baby Monitor
FRITZ!Box 7490 127
5. Enter an external telephone number, an internal tele-
phone number or ss9 for an internal broadcast call.
The internal numbers of the telephones you have con-
nected are listed in telephone book of the FRITZ!Box
user interface.
6. Press “OK”.
7. Select “Activation” and “OK”.
8. Set the sensitivity.
The baby monitor is enabled. The display of your
FRITZ!Fon shows the text “Baby monitor enabled”.
To disable the baby monitor, exit the “Baby Monitor Enabled”
menu.
Configuring a Telephone at the FON Port as a Baby
Monitor
Here is how to configure a telephone at the “FON 1” or
“FON 2” port:
1. Press the following keys on the telephone:
2. The baby monitor is enabled. Place the handset near the
child to be monitored.
3. If the baby monitor is too sensitive, set it to a lower sen-
sitivity. The third button defines the sensitivity. Eight lev-
els are available:
This Is Where the Baby
Monitor Should Call
Keys
Another telephone or mobile
number
s41s<telephone num-
ber>r
Internal telephone number,
see page 128
s41s<internal telephone
number without **>r
All other telephones connect-
ed to the FRITZ!Box (broadcast
call)
s41s9r
To Next Page
Loading...
Need help?
General
Weight and Dimensions
