Enabling DECT Eco
FRITZ!Box 7490 137
How Does DECT Eco Work?
When all registered cordless telephones are in standby oper-
ation, the DECT radio transmission of the FRITZ!Box and the
telephones is switched off.
When a call arrives or you press a key on a cordless tele-
phone, the FRITZ!Box switches DECT radio transmission back
on.
Standby operation of a cordless telephone:
• You are not making any calls.
• You are not using any other telephone functions.
• You are not pressing any keys on the telephone.
Requirements
• In the user interface (see page 32), the option “supports
DECT Eco” must be displayed for each cordless tele-
phone under “DECT / DECT Monitor”.
• The FRITZ!Box must be configured as a DECT base sta-
tion: The setting “DECT enabled” must be enabled under
“DECT / Base Station” in the user interface.
• The following devices may not be registered with the
FRITZ!Box: FRITZ!DECT 200, FRITZ!DECT Repeater,
FRITZ!Box in DECT repeater mode.
Enabling DECT Eco in the FRITZ!Box
1. Open the FRITZ!Box user interface, see page 32.
2. Select the “DECT / Base Station” menu.
3. Enable the “DECT Eco” option and define when DECT Eco
should be active.
4. Click the “Apply” button to save the settings.
5. Register all of the cordless telephones on the FRITZ!Box
again.
DECT Eco is enabled.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
