Push Services: Notification Services of the FRITZ!Box
FRITZ!Box 7490 39
Enabling Push Services
A wizard is available in the FRITZ!Box user interface to guide
you step by step through the configuration of push services.
1. Open the FRITZ!Box user interface, see page 32.
2. On the “Overview” page, select the “Wizards” menu.
3. Start the “Configure Push Services” Wizard.
The wizard guides you through the menus and dialogs to en-
able the push services.
Configuring Push Services
You can adjust the push services to your needs, and also dis-
able any or all push services.
1. Open the FRITZ!Box user interface, see page 32.
2. Select the “System / Push Service / Push Services”
menu.
3. To configure a push service, click the “Edit” button.
4. Configure various settings in the details.
The Help of the FRITZ!Box user interface presents com-
prehensive information on the settings of each push ser-
vice.
5. Click “OK” to save your settings.
In the help of the FRITZ!Box user interface you can find
detailed instructions.
Save settings The settings of your FRITZ!Box are saved au-
tomatically and sent to the specified e-mail
address before every update and each time
the factory settings are restored.
Forgot password Sends you an access link to the specified
e-mail address if you have forgotten your
password.
Current IP address Sends the IP address assigned by the Inter-
net service provider every time the Internet
connection is established.
Push Service Information