24
Function Description
SMTP Server Enter the SMTP server address provided from your e-mail system supplier.
Port Enter the port number provided from your e-mail system supplier. If this column is left
blank, the e-mail server will use port 25 to send e-mails.
Mail From Enter the name of the sender.
SSL Encryption Select “Yes” if your e-mail server is using SSL encryption to protect your e-mail
content from unauthorized access.
Verify Password Some mail servers are required to verify the password. Please enter the “user name”
and “password”.
Subject Enter the subject for the E-Mail.
E-Mail Address List Add the e-mail address(s) of the assigned recipient(s).
Test When all information is entered, click “Test Mail” to try if the receipt.
SMS
Note: Before using this function, you need to apply an account and get an API ID from the mobile
messaging company, such as Clickatell and EVERY8D.
For details, please refer to “API ID APPLICATION FOR SMS MESSAGING” at page 48.
Enter the detailed information needed for text messaging, and click “Save” to confirm. The information
you set here will be applied when “SMS” is selected in “General” → "Trigger".
Function Description
System The text messaging service provider is Clickatell.
User name / Password Enter the account user name and password you created in Clickatell.
API ID Enter the API ID you applied from Clickatell.
Recipient Click “Add” to enter the phone number, including the country code, to receive the
text message. Five sets of phone numbers are allowed.
Transfer Interval Set the interval time in minutes between two-message sending.
The options are 0, 15, 30 & 60.
Reset Counter Click to restart the text messaging, and the SMS will be sent after the specified time
interval since you click this button.
Message Enter the text content (up to 70 characters) you want to send with the text message.
To Next Page
Loading...
