25
Function Description
Test To know whether your SMS setting is correct, click this button to immediately send a
SMS to your phone.
Note: This testing is not free and you will be charged for SMS sending base
on your local rate.
Filter
Choose to permit or block the IP address(es) which can access this camera, and click “Save” to
confirm.
Function Description
Filter Configuration
Error Count Set the maximum count for login failure. When the maximum count is reached, the IP
address trying to access the camera will be locked.
Error Lock Time Set the lock time in minutes when the maximum count of error login for an IP address
is reached.
Echo Request Select “Non-Block” to allow other users to use the ping command to detect the IP
address of your camera, or “Block” to deny the ping command request.
IP/MAC Filter Configuration
IP/MAC Filter Choose to enable or disable the filter function.
IP/MAC Filter Policy If “Enable” is selected, choose whether you want to permit (Allow) or block (Deny) the
IP address list below.
IP/MAC Filter Rules
Rule
‧ To add an item to the IP address list, key in the IP address in “Rule”, and click
“Add”.
‧ To remove an existing item in the IP address list, click the item you want to
remove, and click “Delete”.
To Next Page
Loading...
