ENG
Define the day and the hour
of the end of the schedule. If
Recursive is enabled, define
the hour of the end of the
schedule.
Define if the schedule is
recursive. If it is enabled it is
possible to select the days of
the week.
Further than this minutes a
new capture segment will be
created.
Further than this days the
oldest clips will be deleted on
the recording folder.
If <auto> the schedule
records the clip with default
file and folder.
If Folder, the folder in which
you want to record will be
requested and the file name
will be assigned by default.
If File, the name of the file to
be recorded will be requested
and the folder will be
assigned by default.
If Custom, a file in LTC UTC
format and duration will be
created in the default folder.
If <auto> the schedule
records the clip with the
capture profile by default.
Otherwise the selected profile
will be used.
If <none> the schedule
records without sending any
commands, otherwise the
selected command will be
sent at the capture start.
Snapshot of the currest recording.
If available, connect a video recorder
Eject the tape from the
connected video recorder
Rewind the tape in the
connected video recorder