EasyManuals Logo

Axis 223M User Manual

Axis 223M
70 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #45 background imageLoading...
Page #45 background image
45
AXIS 223M - System Options
Network - QoS (Quality of Service)
Quality of Service (QoS) provides the means to guarantee a certain level of a specified
resource to selected traffic on a network. Quality can be defined as e.g. a maintained level
of bandwidth, low latency, no packet losses, etc. The main benefits of a QoS-aware
network can be summarized as:
the ability to prioritize traffic and thus allow critical flows to be served before
flows with lesser priority.
greater reliability in the network, thanks to the control of the amount of band-
width an application may use, and thus control over bandwidth races between
applications.
The QoS in Axis network video products marks the data packets for various types of
network traffic originating from the product. This makes it possible for network routers
and switches to e.g. reserve a fixed amount of bandwidth for these types of traffic. The
following types of traffic are marked:
live video
live audio
event/alarm traffic
management network traffic
It is important to remember that to be able to use QoS, your network must be properly
configured. If you are unsure as to whether your network is QoS aware, please check with
your network administrator.
QoS Settings
For each type of network traffic supported by your Axis network video product, enter a
DSCP (Differentiated Services Codepoint) value. This value is used to mark the traffic’s IP
header. When the marked traffic reaches a network router or switch, the DSCP value in the
IP header tells the router or switch which type of treatment to apply to this type of traffic,
for example, how much bandwidth to reserve for it.
Note that DSCP values can be entered in decimal or hexadecimal form, but saved values
are always shown in decimal.
For more information on Quality of Service, please see the Axis support web at
www.axis.com/techsup
Network - SMTP (email)
Enter the host names or addresses for your primary and secondary mail servers in the fields
provided, to enable the sending of event and error email messages from the camera to
predefined addresses via SMTP.

Other manuals for Axis 223M

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Axis 223M and is the answer not in the manual?

Axis 223M Specifications

General IconGeneral
Megapixel2 MP
Focal length range4 - 8 mm
Maximum frame rate12 fps
Maximum video resolution1600 x 1200 pixels
Sensor typeCCD
Product colorGray
Focus1.4
I/O portsRS-232 RS-485/422
Security featuresMulti-level password, IP address filtering, HTTPS encryption.
Dimensions (WxDxH)88 x 200 x 49 mm
Compliance industry standardsIEEE 802.1X, IEEE 802.11g/b
Weight and Dimensions IconWeight and Dimensions
Weight620 g

Related product manuals