Contents:
1. General description 3
2. Completeness 3
3. Security rules 4
4. Environment protection 5
5. Technical data 5
6. Keys and indicators 6
7. Preparing moisture analyser to work 7
8. Interfaces 9
9. General working rules 9
10. Description of thermogravimetric analysis 10
10.1 Infrared radiation source 10
10.2 Infrared radiation drying description 10
10.3 Drawing and preparation of a sample 11
10.4 Tools requirements 11
10.5 Single-use pans 11
10.6 Placing a sample 11
10.7 Glass fibre filter 12
10.8 Selection of drying parameters to the sample material 12
10.9 Other practical notes 13
11. Moisture analyser functioning description 14
11.1 Switching on 14
11.2 Drier operation modes 15
11.3 Calculation methods 16
11.4 Drier operation parameters setting 17
11.4.1 Drying profiles 18
11.5 Moisture analyser settings storing 19
11.5.1 Saving settings 19
11.5.2 Loading saved settings 20
11.6 Initial moisture analysis 21
11.7 Proper moisture analysis 23
11.8 Internal thermometer indications correction 24
12. Connecting to a computer or a printer 27
13. Testing and calibration of the balance 29
14. Moisture analyser as a balance 31
14.1 Units 31
14.2 Auto-zeroing 32
14.3 Calibration 33
15. Maintenance and repairs of small defects 35
Declaration of Conformity 37
Drying parameters for different substances (examples) 38
To Next Page
Loading...
