3. Security rules
To avoid electrical shock or damage of the moisture
analyzer or connected peripheral devices, it is necessary
to follow the security rules below.
To feed the analyser use only mains socket with ground contact.
Dryer chamber cover heats up to 40°C, but perforated cover at the top may
heat up over 60°C. Do not touch the cover top during drying as it may cause
severe burns!
During heating, the halogen heaters warm up to very high temperature. Avoid
touching the heaters as it may cause severe burns!
All repairs and necessary regulations can be made by authorised personnel
only.
Do not use the analyser when its cover is opened.
Do not use the analyser in explosive conditions.
Do not use the analyser in high humidity.
If the device seems not to operate properly, plug it out of the mains and do not
use it until checked by authorised service.
To Next Page
Loading...
