Axis AGS200/T250 - Control Panel Keys and Indicators; Main Operational Controls; Navigation and Data Input Keys; Display Status Indicators

6
USER MANUAL
6. Keys and indicators
T = 24,35 C
m = 4,321g
t = 0:00:00s
m0= 0.000g
%
START
SET
RAP
MEM
STOP
T
- tare (subtract package weight from weighed mass)
I/
- switch- on / switch-off (standby),
ENTER
CLR
- confirmation / select the option,
- cancel operation
.
- decimal point,
1/F1
- digit key 1 / START – start measurement (drying),
2/F2
- digit key 2 / SETTINGS – moisture measurement parameters
setting,
3/F3
- digit key 3 / STAT – drying chart, measurement report,
4/F4
- digit key 4 / MEM – settings memory,
5/F5
- digit key 5 / STOP – instant drying termination,
6/0
- digit key 6 / zeroing (optional)
7/
- digit key 7 / printout (data transmission),
8/
- digit key 8 / autocalibration (unused function),
9/MENU
- digit key 9 / enter the function menu
0/  
- digit key 0 / mode switching (analyser – balance)
>
- enter the option,
<
- leave the option,
∧
- navigation / move the cursor up,
∨
- navigation / move the cursor down,
indicator
- result stabilisation,
bar indicator
- total load indicator (0-100%),
indicator OFF
- stand-by mode (when switched-off with I/ , key),
Max, Min, d, e
- metrologic parameters.