AXIS M7014
PTZ (Pan Tilt Zoom)
Control Queue
The administrator can set up a queue for PTZ contro llers from PTZ > Control Queue. Once set up, the PTZ Control Queue buttons
appear in the Live View page offering one viewer exclusive control for a limited period of time. Other users will be placed in queue.
A user who belongs to a group (see Users, on page 28) with a higher PTZ priority can go before other users in the queue and
take control of the product. The order of priority is as follows:
1. Administrator — An administrator takes over PTZ control regardless of w ho is first in queue. The administrator will be
removed from the queue 60 seconds after the last PTZ control command.
2. Event — The Axis product can be configuredtogotoapresetpositionwhentriggered by an alarm (see ). The event will
immediately be placed firs t in the queue except when an administrator is in control.
3. Operator — Same as administrator but with lower priority
4. Guard Tour — A guard tour (see ) has PTZ control for an indefinite period of time. It may be overridden by an operator,
event or administr ator. The guard tour will resume when higher priority groups leave the queue.
5. Viewer — Multiple viewers must wait for their turn. The viewer has 60 seconds PTZ co ntrol before control is passed
on to the next viewer in queue.
Note
• The administrator can enab le and d isable PTZ controls for selected users.
• To identify different users in the viewer group, cookies must be enabled on the client.
21
To Next Page
Loading...
