Axis M7014 - Recipients configuration; Schedules configuration; Recurrence settings

AXIS M7014
Events
Recipients
Recipients receive image files and notification messages. A recipient can be an FTP, HTTP or TCP server, a network share or an e mail
address. TCP servers are used for notification messages only.
To add a recipient:
1. Go to Events > Recipients and click Add.
2. Enter a descriptive name
3. Select a recipient Type.
4. Enter the information needed for the recipient type.
5. Click Test to test the connection to the recipient.
6. Click OK.
Schedules
An action can be set up to occur on a schedule. Included in the list are predefined schedules for after and during office hours,
weekdays or weekends.
To create a new schedule:
1. Go to Events > Schedules and click Add.
2. Enter a descriptive name and the information needed for a daily, weekly, monthly or yearly schedule.
3. Click OK.
To use the schedule in an Action Rule, select the schedule from the Sch
edule drop-down list in the Action Rule Setup page.
Recurrences
An action can b e set up to recur a specific number of
times i n a period, for example every 2 minutes or every ho ur.
To set up a recurrence:
1. Go to Events > Recurrence
s and click Add.
2. Enter a descriptiv
e n a m e and recurrence pattern.
3. Click OK.
To use
therecurrenceinanActionRule,first se lect Time from the Trigger drop-do wn list in the Action Rule Setup page and
then select the recurrence from the second drop-down list.
To modify or remove recurrences , s ele c t the recurrence in the Recurrences List and click Modify or Remove.
25