Axis M7014 - Performance considerations

AXIS M7014
Technical Specifications
Processor,
memory
ARTPEC-4, 512 MB RAM, 128 MB Flash
Power
8-20 V DC, max 7W; Power over Ethernet IEEE 802.3af Class 3, PS-K
Connectors
4x analog composite video inputs (BNC)
1x 10BASE-T/100BASE-TX Ethernet
1x RS-485/422 full duplex (terminal block)
1x DC input terminal block
Local storage
1x microSD/SDHC
Operating
conditions
0–50°C(32–122°F)
Humidity 20 – 80% RH (non-condensing)
Approvals
EN 55022 Class B, EN 61000-3-2, EN 61000-3-3, EN 55024, EN61000-6-1, EN61000-6-2,
FCC Part 15 Subpart B Class B, ICES-003 Class B, VCCI Class B, C-tick AS/NZS CISPR 22,
KCC C lass B, UL/IEC/EN 60950-1
Weight
570 g
Included
accessories
Power supply, mounting and connector kits, Installation Guide, CD with installation and
management tools, software and U ser’s Manual, Windows decoder user licenses
Dimensions
(HxWxD)
38 x 109 x 172 mm
General
Performance considerations
When settings up your system, it is important to c onsider h ow various settin
gs and situations will affect performance. Some factors
affect the amount of bandwidth (the b it rate) required, others can affect the frame rate, and some affect both. If the load on the
CPU reache s its maximum, this will a lso affect the frame rate.
The following factors are among the most important to consider:
• High image resolution and/or lower compression levels result in larger images. B andwidth affected.
• Access by large numbers of Motion JPEG and/or unicast H.264 clients. Bandwidth affected.
• Simultaneous viewing of different streams (resolution, compression) by different clients. Effect on frame rate and bandwidth.
• Accessing Motion JPEG and H.264 video streams simultaneously. Frame rate and bandwidth affected.
• Heavy usage of event settings affect the product’s CPU load. Frame rate affected.
• Heavy network utilization due to poor infrastructure. Bandwidth affected.
• Viewing on poorly performing client computers lowers perceived performance. Frame rate affected.
44