Axis Q1615-E Mk II - Page 46

AXIS Q1615-E Mk II Network Camera
AXIS Video Motion Detection
4. From the Trigger drop-down list, select Applications and then select VMD 3.
5. Congure other settings as required. For example, to only record video during certain time periods, select a Schedule.
6. Under Actions, select Record Video from the Type drop-down list.
7. Select the stream prole and storage device to use and congure the pre- and post-trigger times.
8. Make sure that the rule is enabled and then click OK.
Note
To appear in the Trigger list, the application must be started and its status must be Idle or Running.
46