Axis Q1615-E Mk II User Manual

AXIS Q1615-E Mk II Network Camera
Recordings
Recordings
The Axis product can be congured to record video continuously or according to an action rule:
• To start a continuous recording, see page 54.
• To set up action rules, see page 47.
• To access recordings, see Find Recordings on page 52.
• To play recordings, see Play Recording on page 52.
• To export a recording as a video clip, see Export Video Clip on page 53.
• To congure camera controlled storage, see Storage on page 63.
Find Recordings
Recordings stored on the SD card or network share can be accessed from the Recordings > List page. The page lists all recordings on
the storage device and shows each recording’s start date and time, duration and the event that triggered the recording.
Note
The recording’s start date and time is set according to the Axis product’s date and time settings. If the Axis product is
congured to use a time zone different from the local time zone, make sure to congure the Recording time lters according
to the product’s time zone. Date and time settings are congured under System Options > Date & Time, see Date & Time
on page 58.
To nd a recording, follow these steps:
1. Go to Recordings > List.
2. To reduce the number of recordings displayed, select the desired options under Filter:
Recording time – List recordings that started between the From and To times.
Event – List recordings that were triggered by a specic event. Select continuous to list continuous recordings.
Storage – List recordings from a specic storage device.
Sort – Specify how recordings should be sorted in the list.
Results – Specify the maximum number of recordings to display.
3. To apply the lters, click the Filter button. Some lters may take a long time to complete.
4. The recordings are displayed in the Recording list.
To play a recording, select the recording and click Play. See also Play Recording on page 52.
To view detailed information about a recording, select the recording and click Properties.
To export a recording or a part of a recording as a video clip, select the recording and click Export. See also Export Video Clip on
page 53.
To remove a recording from the storage device, select the recording and click Remove.
Play Recording
Recordings on the SD card or network share can be played directly from the Axis product’s webpages.
52

Axis Q1615-E Mk II Specifications

General

Brand	Axis
Model	Q1615-E Mk II
Category	Security Camera
Language	English