AXIS Q6032-E PTZ Dome Network Camera
Detectors
Detectors
Motion Detection
Motion detection is used to generate an alarm whenever movement starts or stops in the camera view.
Motion detection is configured by defining up to 10 Include and Exclude w indows:
• Include w indows —define areas w here motion should be detected
• Exclude windows —define areas within an Include window that should be ignored (areas outside Include windows
are automatical ly ignored).
For instructions, see
Set Up Motion Detection Windows, on page 28
.
To control the number of motion detection alarms, the parameters Object Size, History and Sensitivity can be adjusted. See
Motion
Detection Parameters, on page 29
.
Once motion d etection windows are configured, the Axis product can be configured to perform actions when m otion is detected.
Possible actions include uploading images and start recording. For more information, see
Setting Up an Action Rule, on page 32
.
Note
Using the motion detection feature may decrease the product’s o ve rall performance.
Set Up Motion Detection Windows
To set up a motion detection Include Window, follow these instructions:
1. Go to Detectors > Motion Detection.
2. Select the Configure Included Windows option and click New. Select the new window in the list of wind o w s and enter
adescriptivename.
3. Adjust the size (drag the bottom right-hand corner) and the position (click on the text at the top and drag to the desired
positi
on) of the window.
4. Adj
ust the Object Size, History and Sensitivity profile sliders (see
Motion Detection Parameters
for details). Any detected
motion within an active window is indicated by red peaks in the Activity window.
5. Click Save.
To exclude parts of the include window, select the Configure Excluded Windows and position the exclude window within the
include window.
28
To Next Page
Loading...
Need help?
General
