Axis Q6032-E PTZ User Manual

AXIS Q6032-E PTZ Dome Network Camera
Hardware Overview
SD card slot - A standard or high-capacity SD card (not included) can be used for local recording with removable storage.
NOTICE
To prevent corruption of recordings, the SD card should be unmounted before removal. To unmount, go to Setup > System
Options > Storage > SD Card an d c lick Unmount.
Control button - The c ontrol button is used for:
• ConnectingtoanAXISVideoHostingSystemservice.See
page 39 . To connect, press and hold the button for about
1 second until the Status LED flashes green.
• ConnectingtoAXISInternetDynamicDNSService. See
page 40 . To connect, press and hold the button for
about 3 seconds.
• Resetting the product to factory default settings. See
page 46 .
Power button - Press the power button to temporarily power the product when the dome cover is removed. The power button is also
used with the control button to reset the camera to factory default settings. See
page 46 .
LED Indicators
Color
Indication
Unlit
Connection and normal operation
Amber
Steady during startup. Flashes during firmware upgrade.
Amber/red Flashes amber/red if n e t work connection is unavailable or lost.
Red Flashes red for firmware upgrade failure.
Green Shows steady green for 10 seconds for normal operation after restart.
Midspan LED Indicators
LED
Color
Indication
Unlit No camera connected.
Green Steady when camera connected, normal operation.
Green, flashing Slow flashwhenoverc
urrent or short circuit condition on the por t.
Port
Green, flashing
Fast flash when input voltage is out of range or other internal error.
AC input Green Steady when A C power connected.
5

Axis Q6032-E PTZ Specifications

General

Brand	Axis
Model	Q6032-E PTZ
Category	Security Camera
Language	English