AXIS Q6032-E PTZ Dome Network Camera
Hardware Overview
Hardware Overview
1
2
3
4
5
6
7
1
Network connector (High PoE)
2
Part number (P/N) & Serial number (S/N)
3
Heater
4
Power button
5
SD card slot (SDHC)
6
Status LED i ndicator
7
Control button
Connectors
For technical specifications, see
page 52
.
Network connector - RJ-45 E thernet connector. Supports High Power over Ethernet (High PoE). Use the supp lied midspan.
NOTICE
Due to local regulations or the environmental and electrical conditions in which the product is to be used, a shielded network
cable (STP) may be appropriate or required. Any network cables that are routed in outdoor environments or similar shall be
shiel
ded (STP) and intended for their specific use. Make sure that the midspan is properly grounded. See
Electromagnetic
Compatibility (EMC)
for regulatory requirements.
4
To Next Page
Loading...
