Cleaning and maintenance
Clean the exterior of this device monthly with a dry or slightly damp microfibre cloth. Ensure that the device is
unplugged before cleaning it.
Check if all of the screws are present and tightened and take action when necessary. Check all metal parts
of the device for any signs of corrosion. If corrosion is found, the device needs to be checked thoroughly.
Power output
The Compar Kit FX1 is equipped with a power output that has an IEC C13 connector. It can be used to
power additional devices so that you don't need to use extra power cables.
The Compar Kit FX1 has a fuse designed to protect only it. The power inputs and outputs are directly linked.
Should there be a problem with the Compar Kit FX1, this will not usually affect any devices that are being
powered by it.
Since a standard 230V group can be subjected to a maximum load of 16A and the maximum capacity of the
IEC C13 or C14 connector is fixed at 10A, a maximum of 2000 watts of equipment can be connected to the
power output. This calculation includes a small safety margin.
This capacity is usually more than sufficient to connect a complete LED light set. Avoid connecting
equipment that requires a lot of power such as smoke machines and halogen lighting.
The information in this user manual is subject to change at any time without notice.
Version:
1.0
Date of creation and author's initials:30-04-2018 RV Revision date and author's initials: -
To Next Page
Loading...
