User Manual
5. Click Next.
Quick Setup
6. Select the WAN Connection Type used by your Internet service provider.
Quick Setup – Choose WAN Connection Type
a. PPPoE When you select PPPoE, you will be asked to enter the User Name
and Password. These fields are case sensitive. Your ISP provides these
parameters.
b. Dynamic IP When you select Dynamic IP, the router will automatically
receive the IP parameters from your ISP without needing to enter any
parameter.
c. Static IP When you select Static IP, you will need to manually enter
connection parameters in the Static IP settings page. Your ISP provides
these parameters.
7. After selecting a connection type, click Next. This opens Quick Setup –Wireless.
Page 18 of 102
To Next Page
Loading...
Need help?
General
