User Manual
Click Connect to connect immediately. Click Disconnect to disconnect immediately.
Connect on Demand You can configure the router to disconnect from your Internet
connection after a specified period of inactivity (Max Idle Time). If your Internet
connection has been terminated due to inactivity, Connect on Demand enables
the router to automatically re-establish your connection as soon as you attempt to
access the Internet again. Select to activate Connect on Demand. If you want your
Internet connection to remain active at all times, enter 0 in the Max Idle Time
field. Otherwise, enter the number of minutes you want to have elapsed before
your Internet connection terminates.
Caution: Sometimes the connection cannot be disconnected although you specify a
time to Max Idle Time, since some applications are visiting the Internet continually in
the background.
Connect Automatically Connect automatically after the router is disconnected.
Select to use this option.
Connect Manually You can configure the router to make it connect or disconnect
manually. After a specified period of inactivity (Max Idle Time), the router will
disconnect from your Internet connection, and you will not be able to re-establish
your connection automatically as soon as you attempt to access the Internet
again. Select to use this option. If you want your Internet connection to remain
active at all times, enter 0 in the Max Idle Time field. Otherwise, enter the
number in minutes that you wish to have the Internet connecting last unless a
new link is requested.
Caution: Sometimes the connection cannot be disconnected although you specify a
time to Max Idle Time, since some applications are visiting the Internet continually in
the background.
Page 43 of 102
To Next Page
Loading...
Need help?
General
