User Manual
To use NTP Server time:
1. Enter Preferable NTP Server IP Address.
2. Click Get GMT.
3. Click Save.
To enable daylight saving time:
1. Select Using daylight saving time.
2. Enter DST begin and DST end.
3. Click Save.
Note:
1. This setting will be used for some time-based functions such as firewall. You must
specify your time zone once you login to the router successfully, if not, the time
limited on these functions will not take effect.
2. The time will be lost if the router is turned off.
3. The router will obtain GMT automatically from Internet if it has already connected
to Internet.
Page 85 of 102
To Next Page
Loading...
Need help?
General
