Bad Elf Flex - Listening for Base; Detected Base

Upon confirmation of the checklist items, the Bad Elf Flex
listens for an incoming corrections feed. Byte count and
packet count increase as data is validated.
Once a valid stream of corrections is detected, the Bad Elf
Flex transitions automatically to the Base Detected mode.
To exit starting the rover feature, press the back button .
Once the base is detected and the Bad Elf Flex determines a
viable corrections feed, you may start the rover.
The Bad Elf Flex displays the serial number of the Bad Elf
Flex base unit and the name of the point used for its reference
position.
Actions
● Press the enter button to start the rover.
● Press the back button to exit starting rover mode
Copyright © 2022. Bad Elf, LLC. 15
All Rights Reserved.