Miscellaneous Menu
Misc
Battery Voltage Displays the current battery voltage. This parameter is Read Only.
Battery Ah Displays the current battery capacity. For example, 0/38Ah to 38/38Ah. This parameter is Read Only.
OTE:N A new battery should be at or near a 0/38 reading.
Language
U
This parameter allows changing the current language. English is the default setting.
The following languages are supported:
German (Deutsch), Czech (Cestina), Spanish (Espanol), French (Francais), Russian (),
Italian (Italiano).
Day, Month, Year
S
A real-time calendar. The day, month, and year must be reprogrammed after the battery is replaced.
Time
S
A real-time clock. The hour, minute, and second must be reprogrammed after the battery is replaced.
EEPROM
A
Format the EEPROM to erase all log files. Totalizers and configuration remain unaffected during a
format.
Battery
S
Saves Totalizers to nonvolatile memory in preparation for battery replacement.
Restart
S
Provides the ability to reset the meter electronics.
HDD Free
S
Indicates the amount of free flash memory space.
Polarity Measured electrode polarizing voltage (just for service purposes).
Datalogger The logging period can be adjusted to the following values:
1 min / 15 min / 1 h / 6 h / 12 h / 24 h. See the Datalogging User Manual for more information.
Information Menu
Info
Serial Number
Serial number of the electronic board.
Version Software version of the device.
Compilation Date Date of the software version.
OPT CRC Checksum of the software update.
APP CRC Checksum of the application.
M-Series® M5000 Electromagnetic Flow Meter
Page 28 September 2013
| sales@mvandc.com | Phone: 877.566.3837 | Fax: 925.407.2903
To Next Page
Loading...
Need help?
General
