Operating Manual BaehrTec A1200 / A2000
English – V100 - Date 09/2017 Page 55/64
To do so proceed as follows.
1. Turn off the device at the main switch and disconnect it from the power
supply. Never clean the device while the handpiece motor is still running!
Risk of injury! In addition, the clamping mechanism will suffer damage!
2. Moisten the clamping mechanism cleaner 2 with alcohol (Art-No. 11032) (never
use re-lubricating disinfectant or other greasy substances, as Easy-Clean may
otherwise cease to function properly).
3. Insert the clamping mechanism cleaner 2 into the opening of your handpiece and
turn it to the left and right.
4. Remove the clamping mechanism cleaner 2.
5. Now leave the handpiece to air for at least 3 minutes.
Your handpiece is now once again ready for operation.
If your handpiece still does not function correctly in spite of these cleaning measures, or if you
have any questions about the cleaning process, please get in touch with us.
For detailed video instructions on cleaning the Easy-Clean
grips to supplement this information sheet, please go to
www.fusspflege.com/easy-clean.
To access the website directly, please scan the QR code with your
smartphone and an appropriate app.
To Next Page
Loading...