108 Lights and views
D50
2
Operation system and specification
Windshield washing
When the start/stop button is in "RUN" mode,
the wiper lever is moved in the direction of the
steering wheel, the washing motor starts to work,
the front windshield washing nozzle sprays
water, then the water spraying stops when it is
loosened, and the front wiper stops
automatically after several times of continuous
wiping.
。
Pull the wiper lever in the direction of the
steering wheel and hold it, then the scrubber
sprays water continuously for up to 12 seconds,
and then stops automatically.
Interior Rearview Mirror
Manual anti-glare interior rearview mirror *
Before driving a vehicle, the inside rearview
mirror should be adjusted to obtain the best
angle of view, and the mirror surface of the
inside rearview mirror should be kept clean.
。
At night, pull the lever on the mirror seat to the
anti-glare position. The inner rearview mirror is
adjusted to reduce the blindness caused by the
rear vehicle lights.
Tips
●In order to ensure traffic safety, the
"blind area" of visual angle should be
minimized when adjusting rearview
mi r ror.
●The position of all rearview mirrors
should be adjusted before driving. Do not
adjust rearview mirrors when driving a
To Next Page
Loading...
Need help?
General
