BAIC D50 Series - Electric Adjustment of Drivers Seat

Seats and storage devices 113
D50
2
Operation system and specification
Backrest angle adjustment:
Pull the adjusting handle
③
upward
，
and shake
the back of the seat to the appropriate
inclination angle at the same time; loosen the
adjusting handle
③
,and shake the back slightly
back and forth until the back is locked reliably.
Electric adjustment of driver's seat *
Switch -A-
Press the switch-A-in all directions indicated by
the arrow to adjust the seat back.
Direction -1- backrest tilts forward
；
Direction -2- Back-to-back tilt.
Switch -B-
Press the switch-B-in all directions indicated by
the arrow to adjust the seat.
Direction -1- Seat integral backward adjustment
；
Direction -2- Seat integral upward adjustment
；
Direction -3- Seat integral forward adjustment
；
Direction -4- Seat overall downward adjustment
。