114 Seats and storage devices
D50
2
Operation system and specification
Manual adjustment of front seats
Seat front and rear adjustment
：
Pull up the front of the seat below the
adjustment pull rod
①，
at the same time move
the seat to the appropriate position before and
after. Loosen and adjust the pull rod
①，
slightly
move the seat back and forth until the seat is
locked reliably.
Backrest Angle adjustment:
Pull the adjusting handle
②，
upward and shake
the back of the seat to the appropriate
inclination angle at the same time; loosen the
adjusting handle
②
and shake the back slightly
back and forth until the back is locked reliably.
Back seat
Back seat folding
If large items need to be placed in the car, the
back of the back seat can be folded to increase
the storage space of the luggage compartment.
Pre-folding preparation
Move the front seat forward to the right position;
Lower the headrest of the rear seat to the lowest
position; Remove the rear seat belts to the
outside
。
Folding method:
The folding of the back seat can be realized by
pressing the lock knobs on both sides of the
head pillow of the middle seat in the back row
and turning the backrest forward at the same
time.
To Next Page
Loading...
Need help?
General
