BAIC D50 Series User Manual

A/C system 125
D50
2
Operation system and specification
Rapid cooling
Start the engine, turn on the air conditioner and
adjust the temperature to the minimum, and
output cold air through the dashboard vents;
Adjust the air volume to the maximum, turn on
the maximum rotation speed of the blower and
start the internal air circulation (which can
prevent the outdoor warm air from entering the
vehicle interior).Once the cooling is complete,
close the loop and reset the air volume as
needed.
Rapid heating
Start the engine, turn on the air conditioner and
adjust the temperature to the maximum, hot air
is output through the lower vent; The heating
system heats the air through the transfer of heat
between engine coolant and cab air, so the
heating system only works when the engine is
running.
Reduce the humidity
A/C system can reduce the humidity of the air
inside the car and quickly defog the windows in
a humid environment.
Used in conjunction with a heater, it can also
heat and dry the air inside the vehicle.
This setting applies to most driving conditions
when the external temperature is above zero.
After starting, set it according to the display and
adjust the temperature control and wind speed
according to the requirements.
Tips
●If the internal temperature is very high
when starting the engine, set the blower to
the highest speed and open the window
and sunroof before turning on
the air
conditioner, the internal air circulation
exchange can be carried out in a short
time, which is conducive to rapid
temperature reduction.
Pollen filtration function
The pollen filtration function can filter the air,
effectively remove pollen and dust particles in
the air, and provide clean air.
Outlet
1. Side outlet
2. Central outlet

BAIC D50 Series Specifications

General

Brand	BAIC
Model	D50 Series
Category	Automobile
Language	English