126 A/C system
D50
2
Operation system and specification
A/C maintenance
The A/C system is completely hermetically
sealed and maintenance shall be performed by
qualified technicians.
To keep the system in optimal condition, make
sure to run for short periods of time each week
(even in winter). When the engine is at normal
operating temperature, start the air conditioning
for at least 10 minutes and try to keep the
vehicle running at a constant speed.
The excess water generated during the
refrigeration and dehumidification process is
drained out of the vehicle by the system through
the drainage pipe at the bottom of the vehicle,
which may lead to the formation of water on the
road surface when the vehicle is stationary,
which is normal.
Air purification function
Some models have the function of air
purification. When the engine starts, the central
control screen can display the PM2.5
concentration and concentration level inside the
car
。
Air purification and AQS functions can be
turned on and off by clicking the button. Air
purification function to filter the air inside the
car, reduce PM2.5 concentration; AQS
automatically switches the air circulation mode
according to the air quality inside and outside
the vehicle, which can prevent pollutants from
entering the vehicle and protect the air quality
inside the vehicle.
For specific use, please refer to the electronic
manual of intelligent vehicle.
Central outlet
Up, down, left, right adjust the central outlet to
change the wind direction.
Counterclockwise rotation of the outlet edge
knob can open the outlet.
Turn the knob on the edge of the outlet
clockwise to close the outlet.
To Next Page
Loading...
Need help?
General
