138 Start and driving
D50
3
Driving guide
Smart key standby activation function
If the vehicle is in a strong signal interference
area, or the battery of the intelligent
remote-control key is low, use the standby start
function when you press the start/stop button to
try to start the vehicle.
Step down the clutch pedal, put the gear in
neutral (manual model) or press the brake pedal,
put the gear in P or N (automatic model), put the
smart key in the cup holder with emergency
start mark, and press the start/stop button to start
the engine.
Tips
Scope of application of alternate start
function:
●Intelligent remote-
power shortage, unable to timely
replacement of the battery.
●When the vehicle is in the area with
strong signal interference, use the standby
start function to drive the vehicle away
from the area, and the keyless start
function can return to normal.
Tips
●When the battery is low enough to start
the engine, try using a jumper cable to
start the engine through another car's
battery.
Warning
●Do not run the engine for a long time in
a poorly ventilated place or closed room.
Because of the poisonous gas in the engine
exhaust, can cause the personnel to be in a
coma or even suffocate to death.
●Do not leave the vehicle unattended
while the engine is running to avoid
accidents.
●Do not start the engine by pushing or
pulling the vehicle. This could lead to a
collision. It may also cause unburned
gasoline to reignite in the catalytic
converter, posing a fire hazard
To Next Page
Loading...
Need help?
General
