Instrument and control system 63
D50
2
Operation system and specification
Trip computer screen (7 inch)
On the driving information interface, pressing
the up/down button: subtotal mileage 1 /
average fuel consumption 1, subtotal mileage 2 /
average fuel consumption 2, driving time /
average speed, cruising range / instantaneous
fuel consumption. Press and hold the up button
and the driving information can be hidden.
Short press the button and the hidden driving
information can be displayed down.
Subtotal mileage 1 / average fuel
consumption 1
Subtotal mileage 1 is the mileage after the
subtotal odometer is cleared. Display range:
0. 0~9999. 9km;
The average fuel consumption 1 is the average
fuel consumption for the subdivision mileage 1
driving distance.
Clear mode:
1.In the display interface, press ENTER |
，
Pop
up the reset popup window. Select√ in the reset
popup window, Press ENTER Select Confirm;
2The start/stop button is in "OFF" mode for 2
consecutive hours;
3. Subtotal mileage1 reaches a maximum of
9999.9 km;
4. Disconnect the battery.
When cleared, the subtotal mileage 1 / average
fuel consumption 1 is cleared at the same time.
Subtotal mileage 2 / average fuel
consumption 2
Subtotal mileage 2 is the mileage after the
subtotal mileage odometer is cleared. Display
range is0. 0~9999. 9km;
The average fuel consumption 2 is the average
fuel consumption of the subdivision mileage 2
driving distance.
Clear mode:
1. In the display interface, press ENTER pop up
the reset popup window. Select√ in the reset
popup window. Press ENTER Select Confirm.
2. Subtotal mileage reaches the maximum
9999. 9km
；
3. Disconnect the battery;
When cleared, the subtotal mileage 2/average
fuel consumption 2 is cleared at the same time.
the parking P
mode
To Next Page
Loading...
Need help?
General
