94 Open and close
D50
2
Operation System and Specification
Fuel filler door
The opening switch of the refueling port is
located on the inner floor of the driver's side
threshold.
Turn up the switch to open the refueling port at
the rear of the car side.
When filling the fuel, slowly unscrew the nozzle
cap counterclockwise. Before completely
unscrewing, stop the nozzle cap at the nozzle for
a short time to release the internal pressure.
Then remove the nozzle cap and place it in the
clamp.
When the filling is completed, rotate the filling
cover clockwise until the "click" sound is heard,
indicating that the filling cover has been
tightened completely.
After tightening the cover of the refueling port,
close the door of the refueling port by hand.
In order to ensure the performance of the car,
unleaded gasoline that meets the requirements
of this car must be used. (92 # and above)
To Next Page
Loading...
Need help?
General
