Bajaj QUTE User Manual

36
Light stalk :(RH):Outer rotary switch on the stalk is provided for selecting Position (Parking) or Head
lamp. Position (parking) lamp works in ignition OFF condition also, but head lamp works only when
ignition switch is in ON position. For selecting Position lamps or Head lights, twist the outer rotary
switch to the desired position.
A) Head / position lamp off : Head lamp, position (Parking) lamp and tail lamp will be OFF in this
position.
B) Position lamp on : Position (Parking) lamp and tail lamp will be ON in this position.
C) Head / position lamp on :Head lamp, position (Parking) lamp and tail lamp will be ON in this
position. Pull the lever to select high beam flash (self returning). Push towards dashboard to select
high beam.
Warning:
Always use low-beam when you approach oncoming vehicles or when other vehicles are ahead.
High-beam can temporarily blind other drivers, which could result in an accident.
AA B
C
3A-2. COMBINATION SWITCH

Bajaj QUTE Specifications

General

Brand	Bajaj
Model	QUTE
Category	Automobile
Language	English